Bayani

Fuskar Milling Cutter Don Aluminum Ingot
Bayanin Samfuri:
Aluminum ingot fuska milling abun yanka an ƙera shi don niƙa saman kafin mirgina mai zafi
tsari na aluminum ingots.The aluminum abu fuska milling abun yanka jerin hada da m
masu yankan niƙa, masu yankan niƙa, da masu yankan niƙa mai rufi.
Ana amfani da shi don yawan niƙa na ɓangarorin da ba su da kyau. Ana amfani da abin yankan niƙa don inganta
smoothness surface na aluminum ingots.The mai rufi milling abun yanka kara lalacewa juriya da lifespan na ruwan wukake.
Siffofin samfur:
1, The milling gefen ne kaifi, sakamakon a cikin m surface a kan milled aluminum ingot, tare da mai kyau
aiki kwanciyar hankali.
2, The ruwa yana da high yawa da kwanciyar hankali, miƙa m tasiri juriya da kuma sa juriya. 3, The ruwa surface yana da kyau smoothness, tabbatar da wani ba m da kuma ba kona milling tsari.
Mai yankan Milling:

Lambar oda | Girma (mm | ||||
L | R | d | S | s1 | |
Saukewa: JT6206-L | 37.4 | 3 | 7 | 8 | 2 |

Lambar oda | Girma (mm) | ||||||
L | R | S | S1 | S2 | d | d1 | |
Saukewa: JT6206-M | 30 | 3 | 8 | 2.4 | 0.65 | 8.2 | 7.2 |
Kammala Milling Cutter:

Lambar oda | Girma (mm) | ||||||
L | L1 | R | R1 | S | S1 | d | |
Saukewa: JT6027 | 37.4 | 37.08 | 3 | 730 | 8 | 2 | 7.4 |
Mai Rufe Milling Cutter:

Jerin Darajoji
Daraja | ISO Code | Kayan Aikin Jiki (≥) | Aikace-aikace | ||
Yawan yawa g/cm3 | Hardness (HRA) | TRS N/mm2 | |||
YG3X | K05 | 15.0-15.4 | ≥91.5 | ≥1180 | Ya dace da mashin ɗin ƙarfe na simintin ƙarfe da ƙarfe mara ƙarfe. |
YG3 | K05 | 15.0-15.4 | ≥90.5 | ≥1180 | |
YG6X | K10 | 14.8-15.1 | ≥91 | ≥ 1420 | Ya dace da mashin ɗin daidaitaccen mashin ɗin ƙarfe da ƙarancin ƙarewa na simintin ƙarfe da ƙarfe mara ƙarfe, da kuma sarrafa ƙarfe na manganese da ƙarancin ƙarfe. |
YG6A | K10 | 14.7-15.1 | ≥91.5 | ≥1370 | |
YG6 | K20 | 14.7-15.1 | ≥89.5 | ≥1520 | Ya dace da ƙaƙƙarfan ƙaƙƙarfan mashin ɗin ƙarfe na simintin ƙarfe da ƙarfe mai haske, kuma ana iya amfani da shi don injin ƙarfe na ƙarfe da ƙarancin ƙarfe. |
YG8N | K20 | 14.5-14.9 | ≥89.5 | ≥ 1500 | |
YG8 | K20 | 14.6-14.9 | ≥89 | ≥1670 | |
YG8C | K30 | 14.5-14.9 | ≥88 | ≥1710 | Dace don shigar da tasirin rotary hakowa da jujjuyawar tasirin hakowa. |
YG11C | K40 | 14.0-14.4 | ≥86.5 | ≥2060 | Ya dace da shigar da haƙoran haƙoran haƙora masu siffar chisel ko conical don injunan hako dutse masu nauyi don magance ƙera dutsen. |
YG15 | K30 | 13.9-14.2 | ≥86.5 | ≥2020 | Ya dace da gwajin tensile na sandunan ƙarfe da bututun ƙarfe a ƙarƙashin ƙimar matsi mai girma. |
YG20 | K30 | 13.4-13.8 | ≥85 | ≥2450 | Dace da yin stamping mutu. |
YG20C | K40 | 13.4-13.8 | ≥82 | ≥2260 | Ya dace da yin tambarin sanyi da matsawar sanyi ya mutu don masana'antu kamar daidaitattun sassa, bearings, kayan aiki, da sauransu. |
YW1 | M10 | 12.7-13.5 | ≥91.5 | ≥1180 | Dace da daidaici machining da Semi-kammala bakin karfe da janar gami karfe. |
YW2 | M20 | 12.5-13.2 | ≥90.5 | ≥1350 | Dace da Semi-kammala na bakin karfe da ƙananan gami karfe. |
YS8 | M05 | 13.9-14.2 | ≥92.5 | ≥1620 | Ya dace da daidaitattun mashin ɗin ƙarfe na tushen ƙarfe, gami da ƙarancin zafin jiki na nickel, da ƙarfe mai ƙarfi. |
YT5 | P30 | 12.5-13.2 | ≥89.5 | ≥ 1430 | Ya dace da yankan nauyi mai nauyi na karfe da simintin ƙarfe. |
YT15 | P10 | 11.1-11.6 | ≥91 | ≥1180 | Ya dace da daidaitaccen mashina da ƙarancin ƙarewa na ƙarfe da simintin ƙarfe. |
YT14 | P20 | 11.2-11.8 | ≥90.5 | ≥1270 | Ya dace da ingantattun injina da ƙarancin ƙarewa na ƙarfe da simintin ƙarfe, tare da matsakaicin ƙimar ciyarwa. YS25 an ƙera shi ne musamman don aikin niƙa akan ƙarfe da simintin ƙarfe. |
YC45 | P40/P50 | 12.5-12.9 | ≥90 | ≥2000 | Ya dace da kayan aikin yankan nauyi, yana ba da kyakkyawan sakamako a cikin jujjuyawar simintin gyare-gyare da ƙirjin ƙarfe daban-daban. |
YK20 | K20 | 14.3-14.6 | ≥86 | ≥2250 | Ya dace don shigar da raƙuman hakowa na rotary tasiri da hakowa a cikin tsarukan tsarukan dutse da in mun gwada da gaske. |
Tsarin oda

Tsarin samarwa

Marufi
